Purpose: To compare the maximum interfragmentary displacement of short oblique proximal phalanx (P1) fractures fixed with an intramedullary headless compression screw (IMHCS) versus a plate-and-screws construct in a cadaveric model that generates finger motion via the flexor and extensor tendons of the fingers.
Methods: We created a 30° oblique cut in 24 P1s of the index, middle, ring, and little fingers for 3 matched pairs of cadaveric hands. Twelve fractures were stabilized with an IMHCS using an antegrade, dorsal articular margin technique at the P1 base. The 12 matched-pair P1 fractures were stabilized with a radially placed 2.0-mm plate with 2 bicortical nonlocking screws on each side of the fracture. Hands were mounted to a frame allowing a computer-controlled, motor-driven, linear actuator powered movement of fingers via the flexor and extensor tendons. All fingers underwent 2,000 full-flexion and extension cycles. Maximum interfragmentary displacement was continuously measured using a differential variable reluctance transducer.
Results: The observed mean displacement differences between IMHCS and plate-and-screws fixation was not statistically significant throughout all time points during the 2,000 cycles. A 2 one-sided test procedure for paired samples confirmed statistical equivalence in fracture displacement between fixation methods at the final 2,000-cycle time point.
Conclusions: The IMHCS provided biomechanical stability equivalent to plate-and-screws for short oblique P1 fractures at the 2,000-cycle mark in this cadaveric model.
Clinical relevance: Short oblique P1 fracture fixation with an IMHCS may provide adequate stability to withstand immediate postoperative active range of motion therapy.
Keywords: Headless compression screw; internal fixation; intramedullary; plate fixation; proximal phalanx fracture.
Copyright © 2021 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.