The pore structure of coal plays a key role in the effectiveness of gas extraction. Conventional hydraulic fracturing techniques have limited success in modifying the pore structure using clean fracturing fluid (CFF), and the stimulating effects of ultrasonic can enhance the effectiveness of CFF in modifying coal pore structures. To research the effects of ultrasonic stimulation on the pore structure of medium to high-rank coal when using CFF, this study employed mercury intrusion porosimetry (MIP) and low-temperature nitrogen adsorption (LT-N2A) methods to analyze the changes in pore structures after cooperative modification. The results indicate that the pore volume and surface area of medium to high rank coal exhibit an increase and followed by a decrease with increasing Ro,max values, while the average pore diameter and permeability demonstrate a decrease and followed by an increase with Ro,max. Although there are some variations in the results of MIP and LT-N2A analysis for different pore size ranges, the overall findings suggest that ultrasonic stimulation in conjunction with CFF effectively alters the coal pore structure. The most significant improvement was observed in coking coal, where pore volume increased by 22%, pore area decreased by 11% and tortuosity decreased by 47%. The improvement of lean coal is the smallest, the pore volume increases by about 7%, and the surface area decreases by about 14%. It is found that the modification of coal pore volume is mainly concentrated in transition pores and macropores. These research outcomes provide valuable insights into the application of ultrasonic technology in coalbed gas extraction.
Keywords: Clean fracturing fluid; Coalbed gas; Fractal dimension; Pore structure; Ultrasonic.
© 2024. The Author(s).