The current study developed a method for quantifying four drugs-Sulfamethoxazole, Trimethoprim, Isoniazid, and Pyridoxine-in rabbit plasma. The method uses gradient liquid chromatography based on analytical quality by design. To achieve separation, a Eclip Plus C18 (250 mm × 5 mm, 4.6 µm) column with L1 packing was used, and analytes were detected at 254 nm at ambient temperature. The optimized mobile phase consisted of 50 mM potassium dihydrogen phosphate buffer (pH 6.5) and Methanol. The concentration of Methanol was 3% (0-5 min), 15% (5-15 min), 55% (15-27 min), and 3% Methanol until the end of the 30-min runtime, and the flow rate was set at 0.95 mL/min. Control Noise Experimentation was used to screen studies, revealing that flow rate, pH, and Methanol concentration significantly affected the analytical attributes. The study identified critical attributes (resolution and asymmetric factor) and developed a quality target method profile. A central composition design was used to optimize the essential parameters. The method developed for the drugs showed peaks at retention times of 6.990 min for Isoniazid, 7.880 min for Pyridoxine, 15.530 min for Sulfamethoxazole, and 26.890 min for Trimethoprim, respectively. The method was validated with linearity in the range of 10-640 ng ml-1, with R2 of 0.9993, 0.9987, 0.9993, and 0.9992 for Sulfamethoxazole, Trimethoprim, Isoniazid, and Pyridoxine, respectively.
Keywords: Bioanalytical quality by design; Gradient elution; Isoniazid; Pyridoxine; Sulfamethoxazole; Trimethoprim.
© 2024. The Author(s).