Laser link acquisition and pointing technique is one of the essential techniques for the inter-satellite laser interferometry for space-based gravitational waves detection and next-generation Earth gravity measurement missions. The first step of building up inter-satellite laser link is using an acquisition camera to capture the inter-satellite laser beam signals within a pre-scanning uncertain cone. Subsequently, high-precision angle measurement technology, namely differential wavefront sensing, is used to achieve a high pointing precision required. Due to the distance constraint of a ground-based simulation experiment, it is difficult to verify directly the feasibility of an inter-satellite laser link acquisition and pointing control scheme. By means of controlling the optical properties of the received laser beam, the long-distance beam propagation is simulated with two optical benches of an inter-satellite interferometer, and the process of a laser link acquisition experiment has been demonstrated. The experimental results show that the inter-satellite laser beams could establish the dual-way locking successfully. The fluctuation of the laser beam pointing direction (in-loop) can be suppressed to about 5 µrad in atmospheric environment. The results verify the feasibility of the laser link acquisition scheme. The experimental setup can be extended to conduct experiments with various parameters, providing technical support for further testing of the inter-satellite laser link acquisition and pointing control methods.